Search results
Results from the WOW.Com Content Network
It is defined as the pressure exerted by a column of water of 1 inch in height at defined conditions. At a temperature of 4 °C (39.2 °F) pure water has its highest density (1000 kg/m 3). At that temperature and assuming the standard acceleration of gravity, 1 inAq is approximately 249.082 pascals (0.0361263 psi). [2]
If using the metric unit meters for distance and the imperial unit inches for target size, one has to multiply by a factor of 25.4, since one inch is defined as 25.4 millimeters. distance in meters = target in inches angle in mrad × 25.4 {\displaystyle {\text{distance in meters}}={\frac {\text{target in inches}}{\text{angle in mrad}}}\times 25.4}
Measurements are in millimeters then inches, i.e. mm (in). Pistol cartridges. Name Bullet Case type Case length Rim Base Shoulder Neck OAL .25 ACP (.25 Auto) 6.375 ...
1 inch per second is equivalent to: = 0.0254 metres per second (exactly) = 1 ⁄ 12 or 0.08 3 feet per second (exactly) = 5 ⁄ 88 or 0.056 81 miles per hour (exactly) = 0.09144 km·h −1 (exactly) 1 metre per second ≈ 39.370079 inches per second (approximately) 1 foot per second = 12 inches per second (exactly)
Example (inch, coarse): For size 7 ⁄ 16 (this is the diameter of the intended screw in fraction form)-14 (this is the number of threads per inch; 14 is considered coarse), 0.437 in × 0.85 = 0.371 in. Therefore, a size 7 ⁄ 16 screw (7 ⁄ 16 ≈ 0.437) with 14 threads per inch (coarse) needs a tap drill with a diameter of about 0.371 inches.
Atmospheric air pressure where standard atmospheric pressure is defined as 1013.25 mbar, 101.325 kPa, 1.01325 bar, which is about 14.7 pounds per square inch. Despite the millibar not being an SI unit, meteorologists and weather reporters worldwide have long measured air pressure in millibar as the values are convenient.
The diameters are sometimes given approximately in fractions of an inch (e.g. the major diameter of a #6 screw is 0.1380 in, approximately 9 ⁄ 64 in = 0.140625 in. The pitch P is the distance between thread peaks.
Oil and petrol is sold in litres. Vehicle tyres (as in the rest of the world) mark the rim diameter in inches and the width in millimetres, such that a tyre marked '165/70R13' has a width of 165 mm, an aspect ratio (profile) of 70% and a 13-inch rim diameter. Tyre pressures may be given in either kilopascals (kPa) or pounds per square inch (PSI).