Ads
related to: converting manual car to automatic transmission line adapters
Search results
Results from the WOW.Com Content Network
The TH400 was phased out for the 1980 models, when the A-727 replaced the TH-400 as the only automatic transmission option for both the SJ Wagoneer/Cherokee wagons and the J-10/J-20 trucks. Internally similar to the Chrysler A-727, the case was one-piece, cast with an AMC pattern bellhousing (not interchangeable with a Chrysler pattern A-727).
Borg-Warner M8, M10, M11A, M11B and M12; cast-iron three-speed automatic with torque converter; used in many AMC 6- and V8-cylinder passenger cars built between 1957 and 1971. These transmissions were either air-cooled with fins on the torque converter and ducts in the bell housing adapter (six cylinder applications) or liquid-cooled, and were ...
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
An automated manual transmission may include a fully automatic mode where the driver does not need to change gears at all. [24] These transmissions can be described as a standard manual transmission with an automated clutch and automated gear shift control, allowing them to operate in the same manner as traditional automatic transmissions.
The name Autostick has been used for a Volkswagen semi-automatic transmission, which is a vacuum-operated automatic clutch system, coupled with a conventional 3-speed manual transmission. The "AutoStick" system designed by Chrysler allows for manual selection of gears with a standard hydraulic automatic transmission , also known as a manumatic .
Manual – the driver has to perform each gear change using a manually operated clutch; Automatic – once placed in drive (or any other 'automatic' selector position), it automatically selects the gear ratio dependent on engine speed and load; Basically there are two types of engine installation:
This unit was an early semi-automatic transmission, based on the design of a conventional manual transmission, which used a servo-controlled vacuum-operated clutch system, with three different gear shifting modes, at the touch of a button; manual shifting and manual clutch operation (fully manual), manual shifting with automated clutch ...
The average manual car driver takes between 500 ms and 1 s to perform vertical gear changes (i.e. 1st-2nd, 3rd-4th, 5th-6th) and 1 - 2 s to perform horizontal gear changes (i.e. 2nd-3rd, 4th-5th). Shift time is also dependent on gear throws (distance between gears), ease of movement, ergonomics of the gear stick , and gearbox condition.
Ads
related to: converting manual car to automatic transmission line adapters