Search results
Results from the WOW.Com Content Network
Make sure that the working end (the free, short end) winds up on the bottom of the standing end; While keeping the 6 and the 9 intact, place the "6" over the "9", with the holes of each number lining up, making absolutely sure the working ends are on opposite sides of the holes, and both working ends are outside, not in between the standing ends.
A cut splice is a join between two ropes, made by side splicing the ends slightly apart, to make an eye in the joined rope which lies shut when the rope is taut. Its original name was bowdlerised to "cut splice". A line eye-spliced to a snap shackle; Eye splice – A splice where the working end is spliced into the working part forming a loop.
The ends get caught in between the two ropes and these two hitches, at the elliptical eye in the middle of the knot. There are two other variants to this bend: a double harness bend with ends pointing in opposite directions, and a double harness bend with parallel ends i.e. with ends pointing in the same direction. The starting side of one of ...
Hip, hipped: A hipped roof is sloped in two pairs of directions (e.g. N–S and E–W) compared to the one pair of direction (e.g. N–S or E–W) for a gable roof. Cross hipped: The result of joining two or more hip roof sections together, forming a T or L shape for the simplest forms, or any number of more complex shapes.
The rope is looped around the stacked wood, and the ends passed through an eye spliced in the end. When the running end is pulled, it tightens the "sling" rope around the blocks preventing them from falling out. The slings are then flown to a central location to be loaded on pallets for transport.
The joining technology is used in any type of mechanical joint which is the arrangement formed by two or more elements: typically, two physical parts and a joining element. The mechanical joining systems make possible to form a set of several pieces using the individual parts and the corresponding joining elements.
This is the most common form of end lap and is used most in framing. For a half lap in which the members are parallel, the joint may be known as a half lap splice. This is a splice joint and is an alternative to scarfing when joining shorter members end to end. Both members in an end lap have one shoulder and one cheek each. Use for:
Also called a bird's beak cut, this joint used in roof construction. A V-shaped cut in the rafter connects the rafter to the wall-plate. [11] Cross lap: A joint in which the two members are joined by removing material from each at the point of intersection so that they overlap. Splice joint: A joint used to attach two members end to end. Scarf ...