Ads
related to: 5 flat to 4 adapter
Search results
Results from the WOW.Com Content Network
Flat 5-pin connector (Towing vehicle side) This contact is not as common, but is compatible with the 4-pin connector in the way that a towing vehicle with this connector can be connected to a trailer with the 4-pin flat plug. The extra connection is often used to block the surge brakes when reversing with the trailer. #
The 5-20R receptacle has a T-shaped neutral hole, to accept both 5-15P and 5-20P plugs. An acceptable alternative version of the 5-20R receptacle has a rectangular slot that will only accept 5-20P plugs. The 5-30 and 5-50 are physically larger, with 1 in (25.4 mm) between power pins; 5-30 also has an L-shaped neutral blade. [17]
Low-profile quad flat-package : 1.4 mm high, varying sized and pins on all four sides Plastic quad flat-pack ( PQFP ), a square with pins on all four sides, 44 or more pins Ceramic quad flat-pack ( CQFP ): similar to PQFP
Round 7-pin trailer connector Type 1, Australian Standard 2513. In this pinout for an ISO 1724 connector, the position light pin is used for electric brakes (Pin 5, 58R), which means that if you connect a trailer with electric brakes to a towing vehicle wired according to ISO 1724 and turn on the position lights the trailer will be braking.
4.00 1.70 9.5 B EIAJ-02 3.15–6.3 V Kobiconn 3219-EX Lumberg 1636 02 Kobiconn 0311-EX (inline) Used in Lenovo Flex 4 adapter. Used for Sony PSP Charger (Input: 100-240VAC, Output: 5VDC @ 1500mA for PSP 1000, 2000, 3000) 4.5 3.0 0.5 12 19.5v Newer HP and Dell laptop computers 4.75 1.70 9.5 C EIAJ-03 6.3–10.5 V Kobiconn 3220-EX Lumberg 1636 03
In the broadcast, film, and television industries, the 4-pin XLR connector is the standard for 12 V power. The connectors are wired pin 1 negative, pin 4 positive. Often pins 1 and 2 will be negative, 3 and 4 positive for a higher current rating. Female connectors are used as supply and male connectors are used on loads.
The flat parallel plug blades are polarized to prevent the hot and the neutral connections from being reversed. In addition, many versions have a molded obstruction bump on top of the adapter, to block the grounding prong and thus physically prevent forcible insertion of a 3-prong plug in the wrong orientation. [citation needed]
3.5-inch and 5.25-inch drives connect to the floppy controller using a 34-conductor flat ribbon cable for signal and control. Most controllers support two floppy drives, although the Shugart standard supports up to four drives attached to a single controller. A cable could have 5.25-inch style connectors, 3.5-inch style connectors, or a ...
Ads
related to: 5 flat to 4 adapter