Search results
Results from the WOW.Com Content Network
In modern times, the 8 bore has uses in the mining, cement, and steel industry. It has been used to knock down overhangs in mines or quarries, break up bridging or stoppages in silos, to desist boiler tubes, and remove slag deposits from rotary kilns, by blasting away at them from a safe distance. This can be done while the kiln is in operation ...
The precast concrete slab has tubular voids extending the full length of the slab, typically with a diameter equal to the 2/3–3/4 the thickness of the slab. This makes the slab much lighter than a massive solid concrete floor slab of equal thickness or strength. The reduced weight also lowers material and transportation costs.
Precast concrete is a construction product produced by casting concrete in a reusable mold or "form" which is then cured in a controlled environment, transported to the construction site and maneuvered into place; examples include precast beams, and wall panels, floors, roofs, and piles.
Weight: W = V x concrete specific gravity = 2.7 m 3 x 24 kN/m 3 = 64.8 kN; Calculated casting bed suction Suction area: A = w x h = 6.0 m x 3.0 m = 18 m 2; Assuming 1.0 kN/m 2 is applied for oiled steel formwork; Suction force: S = A x 1.0 kN/m 2 = 18 x 1.0 = 18 kN; Applied loads at element lifting (sling angle and lateral tension)
Prefabricated concrete slabs are built in a factory and transported to the site, ready to be lowered into place between steel or concrete beams. They may be pre-stressed (in the factory), post-stressed (on site), or unstressed. [10] It is vital that the wall supporting structure is built to the correct dimensions, or the slabs may not fit.
During World War I, Sir Ernest William Moir produced a design for concrete machine-gun pillboxes [5] constructed from a system of interlocking precast concrete blocks, with a steel roof. Around 1,500 Moir pillboxes were eventually produced (with blocks cast at Richborough in Kent) and sent to the Western Front in 1918.
The Precast/Prestressed Concrete Institute (PCI) published the double tee load capacity calculation (load tables) for the first time in the PCI Design Handbook in 1971. The load tables use the code to identify double tee span type by using the width in feet, followed by "DT", followed by depth in inches, for example, 4DT14 is for 4-foot (1.2 m ...
Logo of Eurocode 2 An example of a concrete structure. In the Eurocode series of European standards (EN) related to construction, Eurocode 2: Design of concrete structures (abbreviated EN 1992 or, informally, EC 2) specifies technical rules for the design of concrete, reinforced concrete and prestressed concrete structures, using the limit state design philosophy.