Search results
Results from the WOW.Com Content Network
In aviation, the rule of three or "3:1 rule of descent" is a rule of thumb that 3 nautical miles (5.6 km) of travel should be allowed for every 1,000 feet (300 m) of descent. [ 1 ] [ 2 ] For example, a descent from flight level 350 would require approximately 35x3=105 nautical miles.
V x increases with altitude and V Y decreases with altitude until they converge at the airplane's absolute ceiling, the altitude above which the airplane cannot climb in steady flight. The Cessna 172 is a four-seat aircraft. At maximum weight it has a V Y of 75 kn (139 km/h) indicated airspeed [4] providing a rate of climb of 721 ft/min (3.66 m/s).
In aeronautics, a descent is any time period during air travel where an aircraft decreases altitude, and is the opposite of an ascent or climb.. Descents are part of normal procedures, but also occur during emergencies, such as rapid or explosive decompression, forcing an emergency descent to below 3,000 m (10,000 ft) and preferably below 2,400 m (8,000 ft), respectively the maximum temporary ...
The top of descent may be calculated manually as long as distance, air speed, and current altitude are known. This can be done by finding the difference between current altitude and desired altitude, dividing the result by the desired rate of descent, and then multiplying that figure by the quotient of the ground speed (not airspeed) and 60 ...
An aircraft is streamlined from nose to tail to reduce drag making it advantageous to keep the sideslip angle near zero, though an aircraft may be deliberately "sideslipped" to increase drag and descent rate during landing, to keep aircraft heading same as runway heading during cross-wind landings and during flight with asymmetric power. [1]
In aviation, a variometer – also known as a rate of climb and descent indicator (RCDI), rate-of-climb indicator, vertical speed indicator (VSI), or vertical velocity indicator (VVI) – is one of the flight instruments in an aircraft used to inform the pilot of the rate of descent or climb. [1]
A useful formula pilots use to calculate descent rates (for the standard 3° glide slope): Rate of descent = (ground speed ⁄ 2) × 10. or Rate of descent = ground speed × 5. For other glideslope angles: Rate of descent = glide slope angle × ground speed × 100 / 60, where rate of descent is in feet per minute, and ground speed is in knots.
An onboard navigation system displays a constant rate descent path to minimums. The VNAV path is computed using aircraft performance, approach constraints, weather data, and aircraft weight. The approach path is computed from the top of descent point to the end of descent waypoint, which is typically the runway or missed approach point. [1]