Search results
Results from the WOW.Com Content Network
The visible water surface in a toilet is the top of the trap's water seal. Each fixture drain, with exceptions, must be vented so that negative air pressure in the drain cannot siphon the trap dry, to prevent positive air pressure in the sewer from forcing gases past the water seal, and to prevent explosive sewer gas buildup.
A sewer pipe is normally at neutral air pressure compared to the surrounding atmosphere.When a column of waste water flows through a pipe, it compresses air ahead of it in the system, creating a positive pressure that must be released so it does not push back on the waste stream and downstream traps, slow drainage, and induce potential clogs.
Schematic of a dry toilet: [1] Left a squat toilet, right a pedestal type toilet. A dry toilet (or non-flush toilet, no flush toilet or toilet without a flush) is a toilet which, unlike a flush toilet, does not use flush water. [1] Dry toilets do not use water to move excreta along or block odors. [2]
This system is suitable for locations plumbed with 12.7 or 9.5 mm (1 ⁄ 2 or 3 ⁄ 8 inch) water pipes which cannot supply water quickly enough to flush the toilet; the tank is needed to supply a large volume of water in a short time. The tank typically collects between 6 and 17 L (1.6 and 4.5 US gallons) of water over a period of time.
A flushometer is usually installed in a commercial setting with the exception of some older apartments in large cities, [2] as it provides a high-pressure and better-performing wash and flush than a normal gravity toilet.
Composting toilet; Sanitation facilities that are not considered as "improved" (also called "unimproved") are: Public or shared latrine (meaning a toilet that is used by more than one household) Flush/pour flush to elsewhere (not into a pit, septic tank, or sewer) Pit latrine without slab; Bucket latrines; Hanging toilet / latrine
A composite overwrapped pressure vessel (COPV) is a vessel consisting of a thin, non-structural liner wrapped with a structural fiber composite, designed to hold a fluid under pressure. The liner provides a barrier between the fluid and the composite, preventing leaks (which can occur through matrix microcracks which do not cause structural ...
A low-flush toilet (or low-flow toilet or high-efficiency toilet) is a flush toilet that uses significantly less water than traditional high-flow toilets. Before the early 1990s in the United States, standard flush toilets typically required at least 3.5 gallons (13.2 litres) per flush and they used float valves that often leaked, increasing their total water use.