Search results
Results from the WOW.Com Content Network
The gold is typically applied by quick immersion in a solution containing gold salts. Some of the nickel is oxidized to Ni 2+ while the gold is reduced to metallic state. A variant of this process adds a thin layer of electroless palladium over the nickel, a process known by the acronym ENEPIG. [1]
The barrel is then rotated, and electrical currents are run through the various pieces in the barrel, which complete circuits as they touch one another. The result is a very uniform and efficient plating process, though the finish on the end products will likely suffer from abrasion during the plating process.
The thickness of gold plating on jewellery is noted in microns (or micro-meters). The microns of thickness determines how long the gold plating lasts with usage. The jewellery industry denotes different qualities of gold plating in the following terminology Gold flashed / Gold washed - gold layer thickness less than 0.5 micron
Plating is a finishing process in which a metal is deposited on a surface. Plating has been done for hundreds of years; it is also critical for modern technology. Plating is used to decorate objects, for corrosion inhibition, to improve solderability, to harden, to improve wearability, to reduce friction, to improve paint adhesion, to alter conductivity, to improve IR reflectivity, for ...
Electroless deposition is an important process in the electronic industry for metallization of substrates. Other metallization of substrates also include physical vapor deposition (PVD), chemical vapor deposition (CVD), and electroplating which produce thin metal films but require high temperature, vacuum, and a power source respectively. [20]
Ion plating (IP) is a physical vapor deposition (PVD) process that is sometimes called ion assisted deposition (IAD) or ion vapor deposition (IVD) and is a modified version of vacuum deposition. Ion plating uses concurrent or periodic bombardment of the substrate, and deposits film by atomic-sized energetic particles called ions .
Nobilis rings, picture from book A.Watt – Electro-deposition : a practical treatise on the electrolysis of gold, silver, copper, nickel, and other metals, and alloys, with descriptions of voltaic batteries, magneto and dynamo-electric machines, thermopiles, and of the materials and processes used in every department of the art and several ...
LIGA consists of three main processing steps: lithography, electroplating, and molding. There are two main LIGA-fabrication technologies: X-Ray LIGA, which uses X-rays produced by a synchrotron to create high-aspect-ratio structures, and UV LIGA, a more accessible method which uses ultraviolet light to create structures with relatively low aspect ratios.