Search results
Results from the WOW.Com Content Network
A diesel-fueled engine has no ignition source (such as the spark plugs in a gasoline engine), so diesel fuel can have a high flash point, but must have a low autoignition temperature. Jet fuel flash points also vary with the composition of the fuel. Both Jet A and Jet A-1 have flash points between 38 and 66 °C (100 and 151 °F), close to that ...
On average, U.S. petroleum refineries produce about 19 to 20 gallons of gasoline, 11 to 13 gallons of distillate fuel diesel fuel and 3 to 4 gallons of jet fuel from each 42 gallon (152 liters) barrel of crude oil. The product ratio depends upon the processing in an oil refinery and the crude oil assay. [12]
The technical definitions vary between countries so the United Nations created the Globally Harmonized System of Classification and Labeling of Chemicals, which defines the flash point temperature of flammable liquids as between 0 and 140 °F (60 °C) and combustible liquids between 140 °F (60 °C) and 200 °F (93 °C).
Class IB liquids with a flash point less than 73 °F (23 °C) and a boiling point equal to or greater than 100 °F (38 °C) and class IC liquids with a flash point equal to or greater than 73 °F (23 °C), but less than 100 °F (38 °C) have a NFPA 704 flammability rating of 3
No. 1 fuel oil No. 1 distillate No. 1 diesel fuel Kerosene: Jet fuel: Distillate 9-16 No. 2 fuel oil No. 2 distillate No. 2 diesel fuel: Road diesel Rail diesel Marine gas oil Distillate 10-20 No. 3 fuel oil No. 3 distillate No. 3 diesel fuel Marine diesel oil Distillate No. 4 fuel oil No. 4 distillate No. 4 residual fuel oil Bunker A
In North America, gas stations offer two types of diesel fuel – according to ASTM D975 [5] these are named No. 1 and No. 2 fuel. No. 1 fuel (similar to kerosene) has a natural CFPP of -40 °C but it is more expensive than No. 2 fuel. Adding No. 1 fuel will lower the CFPP of No. 2 fuel – adding 10% will lower the CFPP temperature by about 5 ...
Due to the higher density, diesel fuel offers a higher volumetric energy density: the density of EN 590 diesel fuel is defined as 0.820 to 0.845 kg/L (6.84 to 7.05 lb/US gal) at 15 °C (59 °F), about 9.0-13.9% more than EN 228 gasoline (petrol)'s 0.720–0.775 kg/L (6.01–6.47 lb/US gal) at 15 °C, which should be put into consideration when ...
Kerosene-based fuel has a much higher flash point than gasoline-based fuel, meaning that it requires significantly higher temperature to ignite. It is a high-quality fuel; if it fails the purity and other quality tests for use on jet aircraft, it is sold to ground-based users with less demanding requirements, such as railroads.