Search results
Results from the WOW.Com Content Network
A vacuum ejector, or simply ejector, or aspirator, is a type of vacuum pump, which produces vacuum by means of the Venturi effect.. In an ejector, a working fluid (liquid or gaseous) flows through a jet nozzle into a tube that first narrows and then expands in cross-sectional area.
Jet aerators can be installed either as submersible units or piped through the tank wall using an external dry-installed chopper pump to feed the aspirating ejector(s). Jet aerators are easily configured into any basin geometry including circular, rectangular, looped reactors and sloped wall basins.
The propelling nozzle converts a gas turbine or gas generator into a jet engine. Power available in the gas turbine exhaust is converted into a high speed propelling jet by the nozzle. The power is defined by typical gauge pressure and temperature values for a turbojet of 20 psi (140 kPa) and 1,000 °F (538 °C). [18]
It is a fluid-dynamic pump with no moving parts except a valve to control inlet flow. Depending on the application, an injector can also take the form of an eductor-jet pump, a water eductor or an aspirator. An ejector operates on similar principles to create a vacuum feed connection for braking systems etc.
Each wing tank often has its own electric boost fuel pump, and each engine has its own mechanical pump, replicating the fuel system described above for the single engine. In case of single-engine operation, there is often a method incorporated to "cross-feed" the engine (left tank feeding right engine, or vice versa).
Head gasket with a leak between the rightmost and centre cylinders. A leak in the head gasket - often called a "blown head gasket" - can result in a leak of coolant, the combustion gasses, or both. Blue smoke from the exhaust suggests that excess oil is entering the combustion chambers (although there are other possible causes than a head ...
An oil diffusion pump is used to achieve higher vacuum (lower pressure) than is possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high-vacuum range, down to 1 × 10 −9 mbar (1 × 10 −7 Pa), diffusion pumps today can produce pressures approaching 1 × 10 −10 mbar (1 × 10 −8 Pa) when properly used with modern fluids and accessories.
Fuel system - Distribution type jet pump (indirect injection) Combustion chamber - Swirl type; Bore x Stroke - 91.1 mm × 95 mm (3.59 in × 3.74 in) Compression ratio - 21.0:1; Lubrication System - Pressure feed, full flow filtration; Intercooler Type - Aluminium Air-to-Air, Top-mounted; Turbocharger - Mitsubishi TD04-09B; Also known as Hyundai ...