Search results
Results from the WOW.Com Content Network
The adaptors themselves were 69.9 inches (1.78 m) long and 14.18 inches (36.0 cm) in diameter. They would be shipped empty, then filled by hand. Depending on how many projectiles could be packed in, loaded weight varied between 560 and 625 pounds (254 and 283 kg), with the theoretical maximum number of projectiles listed as 17,500.
Cartridge adapters have also been made to use .38 caliber handgun cartridges with bullet diameters of approximately .357-inch (9.1 mm) in .35 caliber rifles designed for bullets of .358-inch (9.1 mm) diameter. [3] Supplemental chambers in .22 caliber, and potentially .17 caliber as well, pose a special problem not shared by larger calibers.
The thread is nominally 1 inch (25.4 mm) in diameter, with 32 threads per inch (0.794 mm pitch), designated as "1-32 UN 2A" in the ANSI B1.1 standard for unified screw threads. The flange focal distance is 17.526 millimetres (0.6900 in) for a C mount.
Fukidake — diameter is 13 mm (0.51 in) cal in Japan. Tournament length is 120 cm (47 in), but for practice one can use a 50 cm (20 in) tube. No mouthpiece is used; users wrap their lips around the tube. International versions can be slightly more flexible, allowing a tube of 122 cm (4 ft) and 13 mm (0.50 in) cal under IFA rules.
The older type, the standard rubber bullet, is a steel sphere coated in a thin layer of rubber, weighing 14 grams, while the newly improved rubber bullet, introduced in 1989, is a rubber-coated metal cylinder 1.7 cm in diameter, weighing 15.4 grams. [18] Of the lethal injuries from this projectile, most are suffered to the head. [18]
12.7 × 99 mm Browning M2HB machine gun; ranging gun L21A1 12.7 × 99 mm Browning M2HB machine gun; ranging gun for the 120 mm tank gun on the Chieftain tank: L111A1 [131] 12.7 × 99 mm M2QCB machine gun M3M [132] 12.7 × 99 mm FN Herstal built upgraded M2 for use on Commando Helicopter Force and other units as helicopter door guns.
Generic plugs are often described by their inside diameter, such as 2.1 mm DC plugs. After the two common 5.5 mm OD (Outer Diameter) plugs, the next-most common size is 3.5 mm OD with a 1.3 mm ID (Inner Diameter), usually about 9.5 mm in length, although both longer and shorter versions also exist. These 3.5 mm OD plugs are normally used for ...
The protective-earth pin is a rectangular cross section 8.0 mm by 4.0 mm, 22.3 mm long and with a centre line 22.2 mm from the line/neutral pin centre line. The dimensions were originally specified in decimal inches with asymmetric tolerances and redefined as minimum and maximum metric dimensions in BS 1363:1984.