Search results
Results from the WOW.Com Content Network
the medium gross density of 850 kg/m 3 to 1.100 kg/m 3 (white coloured blocks, suitable for standard usage) the high gross density blocks of 1.100 kg/m 3 to 1.500 kg/m 3 (reddish colour, suitable for walls with higher acoustic performance requirements) The dimensions of these blocks are: length 500 mm, height 500 mm. Four blocks thus make 1 m 2.
Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures. [1] " Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example – 2-inch nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a 2.375-inch (60.3 mm) outside ...
Lengths up to 16 feet (4.9 m) are common; the most common is 8 feet (2.4 m). Common thicknesses are 1 ⁄ 2 and 5 ⁄ 8 inch (13 and 16 mm); thicknesses of 1 ⁄ 4, 3 ⁄ 8, 3 ⁄ 4, and 1 inch (6, 10, 19, and 25 mm) are used in specific applications. In many parts of Canada, drywall is commonly referred to as Gyproc.
[2] Gypsum waste from new construction. Gypsum waste from new construction activities is typically a clean waste, and primarily consists of off-cuts of plasterboard (drywall, wallboard or gyprock) when the boards have been cut to fit the dimensions of the wall or ceiling. The waste may constitute 15% of the gypsum materials used on the site.
The EUR-pallet's dimensions are defined in the following standards: UIC 435-2 Standard of quality for EUR flat pallets made of wood measuring 800 mm x 1200 mm (EUR-1) ISO 445 Pallets for materials handling - Vocabulary (ISO 445:2008) ISO 3676 Packaging—Unit Load Sizes—Dimensions; ISO 3394 Dimensions of Rigid Rectangular Packages, Transport ...
Plaster investments can withstand the high heat and pressure needed to ensure a rigid denture base. Moreover, in dentistry there are 5 types of gypsum products depending on their consistency and uses: 1) impression plaster (type 1), 2) model plaster (type 2), dental stones (types 3, 4 and 5) [citation needed]
When used as siding boards, widths between 130mm and 300mm (5.25 inch to 12 inch) are available. [4] Fiber cement thicknesses vary between 4.5-18mm and also vary in density – the lower density resulting in a fibrous rough edge when cut and the higher density having a cleaner smoother edge when cut.
Gypsum is moderately water-soluble (~2.0–2.5 g/L at 25 °C) [13] and, in contrast to most other salts, it exhibits retrograde solubility, becoming less soluble at higher temperatures. When gypsum is heated in air it loses water and converts first to calcium sulfate hemihydrate ( bassanite , often simply called "plaster") and, if heated ...