Search results
Results from the WOW.Com Content Network
The Princeton circuits up through 5C2 differed from the Fender Champ in having two versus one preamp stage (6SC7 dual-triode vs 6SJ7 pentode) and added the tone control that was absent in the Champs; the 12AX7-based Princeton models 5D2 through 5F2-A were essentially the Champ circuits 5D1 through 5F1 with a tone control and a somewhat larger ...
1 Mini-DIN 4-pin, 1 Mini-DIN 7-pin, 1 Mini-VGA, 2 BNC, 2 RCA connectors, 8-pin DIN, [4] SCART 21-pin: S-VHS, some laptop computers, analog broadcast video, 1980-1990s home computers including the Commodore 64, C128 and Atari 8-bit computers: The 4-pin mini-DIN that is most common in consumer products today debuted in JVC's 1987 S-VHS. The 7-pin ...
Princeton Technology Ltd. was originally established in 1995. [1] The company is a fabless manufacturing company, designing products which are ordered to manufactures in Taiwan and China . The company offers flash memory products ( SD cards , USB flash drives ), DRAM , LCD , LED display , Hard disk drives , NAS and other electronic products. [ 2 ]
Figure 1: Example two-port network with symbol definitions. Notice the port condition is satisfied: the same current flows into each port as leaves that port.. In electronics, a two-port network (a kind of four-terminal network or quadripole) is an electrical network (i.e. a circuit) or device with two pairs of terminals to connect to external circuits.
1A1A44J5 - Unit 1, Assembly 1, Sub-Assembly 44, Jack 5 (J5 is a connector on a box referenced as A44) 1A1A45J333 - Unit 1, Assembly 1, Sub-Assembly 45, Jack 333 (J333 is a connector on a box referenced as A45) A cable connecting these two might be: 1A1W35 - In the assembly A1 is a cable called W35. Connectors on this cable would be designated ...
This Paul Rivera-specified Fender guitar amplifier was introduced in 1982 to replace the Princeton Reverb. [1] It was a completely different and significantly more powerful amplifier. [ 2 ] Designed by Ed Jahns, it featured a built-in reverb, treble boost and mid boost controls, and a switchable lead (overdrive) effect.
With the arrival of SCSI-2, the situation was a bit less chaotic. For narrow SCSI, most manufacturers used the Amplimite .050 connector, also sometimes referred to as a High Density or HD50. This connector has two rows of 25 pins and a trapezoidal (D-shaped) shell, and is about 1 3/8” (36mm) wide. [1]
Such cards, when equipped with only a VGA connector adapter cable, cannot be connected to a monitor with only a DVI-D input. A DMS-59 to DVI adapter cable needs to be used with such monitors. The DMS-59 connector is derived from the LFH-60 Molex low-force helix connector, which could be found in some earlier graphics cards.