Search results
Results from the WOW.Com Content Network
SAE J306 is a standard that defines the viscometric properties of automotive gear oils.It is maintained by SAE International. [1] Key parameters for this standard are the kinematic viscosity of the gear oil, the maximum temperature at which the oil has a viscosity of 150,000 cP, and a measure of its shear stability through the KRL test.
The oil fails the test at a particular temperature if the oil is too viscous. The grade of the oil is that associated with the coldest temperature at which the oil passes the test. For example, if an oil passes at the specified temperatures for 10W and 5W, but fails at the 0W temperature, the oil is grade 5W. It cannot be labeled 0W or 10W.
The viscometrics for gear oils are standardized in SAE J306. Multigrade gear oils are becoming more common; while gear oil does not reach the temperatures of motor oil, it does warm up appreciably as the car is driven, due mostly to shear friction (with a small amount of heat conduction through the bellhousing from the engine block).
Print/export Download as PDF; ... Gear oil; H. Hydraulic fluid; S. SAE J306 This page was last edited on 18 July 2008, at 17:30 (UTC ...
SAE International is a global professional association and standards organization based in Warrendale, Pennsylvania, United States.Formerly the Society of Automotive Engineers, the organization adopted its current name in 2006 to reflect both its international membership and the increased scope of its activities beyond automotive engineering and the automotive industry to include aerospace and ...
The SAE steel grades system is a standard alloy numbering system (SAE J1086 – Numbering Metals and Alloys) for steel grades maintained by SAE International. In the 1930s and 1940s, the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels. These efforts were similar ...
Examples include enclosed gear drives operating at low speeds and open gearing. Grades 0, 1 and 2 are used in highly loaded gearing. Grades 1 through 4 are often used in rolling contact bearings. Greases with a higher number are firmer, tend to stay in place and are a good choice when leakage is a concern.
where U is the oil's kinematic viscosity at 40 °C (104 °F), Y is the oil's kinematic viscosity at 100 °C (212 °F), and L and H are the viscosities at 40 °C for two hypothetical oils of VI 0 and 100 respectively, having the same viscosity at 100 °C as the oil whose VI we are trying to determine.