Search results
Results from the WOW.Com Content Network
This chart shows the most common display resolutions, with the color of each resolution type indicating the display ratio (e.g., red indicates a 4:3 ratio). This article lists computer monitor, television, digital film, and other graphics display resolutions that are in common use. Most of them use certain preferred numbers.
The HD or 720p resolution of 1280 × 720 pixels stems from high-definition television (HDTV), where it originally used 50 or 60 frames per second. With its 16:9 aspect ratio, it is exactly 2 times the width and 1 + 1 / 2 times the height of 4:3 VGA ( 640 × 480 ), which shares its aspect ratio and 480 line count with NTSC .
Many high-end LCD televisions now have a 120 or 240 Hz (current and former NTSC countries) or 100 or 200 Hz (PAL/SECAM countries) refresh rate. The rate of 120 was chosen as the least common multiple of 24 fps (cinema) and 30 fps (NTSC TV), and allows for less distortion when movies are viewed due to the elimination of telecine (3:2 pulldown).
This is the highest resolution that generally can be displayed on analog computer monitors (most CRTs), and the highest resolution that most analogue video cards and other display transmission hardware (cables, switch boxes, signal boosters) are rated for (at 60 Hz refresh). 24-bit colour requires 9 MB of video memory (and transmission ...
1080p progressive scan HDTV, which uses a 16:9 ratio. Some commentators also use display resolution to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 ...
This is slightly less than the 340 MHz maximum of HDMI 1.4, and is sufficient for up to 1920 × 1080 at 120 Hz, 2560 × 1440 at 60 Hz, or 3840 × 2160 at 30 Hz. Older adapters, which were only capable of the 165 MHz speed, were retroactively termed "Type 1" adapters, with the new 300 MHz adapters being called "Type 2".
60 fps typically, some can do 120 fps; internally, display refreshed at e.g. 480 or 600 fps [20] 60 fps typically. Up to 480 fps. [21] Flicker: Perceptible on lower refresh rates (60 fps and below) [22] Depends; in 2013 most LCDs used PWM to dim the backlight [23] However, since then many flicker free LCD computer monitors were introduced. [24]
Video modes with vertical refresh frequency being a multiple of 6 Hz (i.e. 24, 30, 60, 120, and 240 Hz) are considered to be the same timing as equivalent NTSC modes where vertical refresh is adjusted by a factor of 1000/1001.