Search results
Results from the WOW.Com Content Network
A male D-subminiature connector used for an RS-232 serial port on an IBM PC compatible computer along with the serial port symbol. A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. [1]
IBM had called the four well-defined communication RS-232 ports the "COM" ports, starting from COM1 through COM4. In BASICA and PC DOS you can open these ports as "COM1:" through "COM4:", and all PC compatibles using MS-DOS used the same denotation. [citation needed] Most PC-compatible computers in the 1980s and 1990s had one or two COM ports.
Frequent use of a serial port is for a direct computer-to-computer connection. This requires an adapter called a null modem, which isn't actually a modem in the traditional sense, but rather a connector plug that simply crosses the complementary pins on two serial ports so the two sides can communicate. A null modem typically connects the DTR ...
"Y" cables may be used to allow using another serial port to monitor all traffic on one direction. A serial line analyzer is a device similar to a logic analyzer but specialized for RS-232's voltage levels, connectors, and, where used, clock signals; it collects, stores, and displays the data and control signals, allowing developers to view ...
Examples of computer connector sockets on various laptops Ports on the back of the Apple Mac Mini (2005). A computer port is a hardware piece on a computer where an electrical connector can be plugged to link the device to external devices, such as another computer, a peripheral device or network equipment. [1]
[citation needed] An interface called "Stack" might define two methods: push() and pop(). It can be implemented in different ways, for example, FastStack and GenericStack—the first being fast, working with a data structure of fixed size, and the second using a data structure that can be resized, but at the cost of somewhat lower speed.
Asynchronous start-stop is the lower data-link layer used to connect computers to modems for many dial-up Internet access applications, using a second (encapsulating) data link framing protocol such as PPP to create packets made up out of asynchronous serial characters. The most common physical layer interface used is RS-232D.
These UARTs' maximum standard serial port speed is 9600 bits per second if the operating system has a 1 millisecond interrupt latency. 8250 UARTs were used in the IBM PC 5150 and IBM PC/XT, while the 16450 UART were used in IBM PC/AT-series computers. The 8251 has USART capability.